CYLINDER CONTAINMENT
SSR Series
Stationary Cylinder Storage Racks
 SSR Series Stationary
Storage Racks are recommended where cylinders may be exposed to vehicular traffic or material handling equipment collisions. These racks fully surround
cylinders with 2 inch square steel heavy gauge tubes welded and sealed with powder coated epoxy. Two levels of welded steel chains with bit snaps make
cylinder racking easy and convenient. Available in standard and custom configurations from one to 16 cylinder capacity. All listed units meet or exceed
requirements for UFC, NFPA, CGA, and OSHA, as well as Seismic Zone 4 requirements.
SSR Series Racks include: 2 by 2 inch .125 wall square tubes, fully welded construction support structure on 2 levels, epoxy powder paint protection,
welded steel chains with bit snaps and floor mounting plates with predrilled holes. Floor mounting bolts are required(not included). All racks are shipped
fully assembled.
Table I, Stationary Cylinder Storage Racks
| Part No. |
Cylinders
(Wide x Deep) |
Dimensions
H x D x W (in.) |
| SSR-11 |
1 (1 x 1) |
30 x 16 x 16 |
| SSR-12 |
2 (1 x 2) |
30 x 28 x 16 |
| SSR-13 |
3 (1 x 3) |
30 x 38 x 16 |
| SSR-14 |
4 (1 x 4) |
30 x 50 x 16 |
| SSR-21 |
2 (2 x 1) |
30 x 16 x 30 |
| SSR-22 |
4 (2 x 2) |
30 x 28 x 30 |
| SSR-23 |
6 (2 x 3) |
30 x 38 x 30 |
| SSR-24 |
8 (2 x 4) |
30 x 50 x 30 |
|
| Part No. |
Cylinders
(Wide x Deep) |
Dimensions
H x D x W (in.) |
| SSR-31 |
3 (3 x 1) |
30 x 16 x 42 |
| SSR-32 |
6 (3 x 2) |
30 x 28 x 42 |
| SSR-33 |
9 (3 x 3) |
30 x 40 x 42 |
| SSR-34 |
12 (3 x 4) |
30 x 52 x 42 |
| SSR-41 |
4 (4 x 1) |
30 x 16 x 58 |
| SSR-42 |
8 (4 x 2) |
30 x 28 x 58 |
| SSR-43 |
12 (4 x 3) |
30 x 40 x 58 |
| SSR-44 |
16 (4 x 4) |
30 x 52 x 58 |
|
|
