Advanced Specialty Gas Equipment

pdf  Download PDF

Line Regulator Model AG3810 LINE REGULATORS
Models AG3800, AG3805, AG3810
Ultra High Purity, Standard Flow Line Regulators

The Models AG3800, AG3805, and AG3810 regulators are designed for ultra high purity gases used in line applications at inlet pressures up to 3000 psig. The metal to metal diaphragm to body seal design assures maximum diffusion resistance. Convoluted stainless steel diaphragms provide enhanced performance and excellent accuracy. These regulators are specially suited for point-of-use gas delivery systems requiring high leak integrity and guaranteed gas purity levels. Models AG3800 and AG3805 are for non-corrosive gases; Model AG3810 is suitable for use with corrosive gases.

 

Line Regulator with Optional Mounting PlateStandard Features
  • Metal to Metal Diaphragm to Body Seal (without back-up o-ring) assures maximum diffusion resistance.
  • High Purity Regulator Design permits vacuum purging of regulator.
  • In-line Porting permits direct installation of regulator in piping system.
  • Filter traps foreign matter, extends regulator life and reduces maintenance.
  • Threaded Holes in Rear of Regulator permit front panel mounting.
Optional Features
  • Mounting Ring permits regulator to be panel mounted.
  • Compression Fittings installed in inlet and outlet ports allow connection to 1⁄4" or 1⁄8" tubing.
  • Regulator mounting plate allows for easy mounting of regulator to wall or panel.
Specifications
Maximum Inlet Pressure: 3000 psig

Delivery Pressure Range

Delivery Pressure Gauge

Filter: 40 micron

Gauge Size: 2" Dial

Operating Temperature Range: -40°F to 140°F

Flow Coefficient: Cv = 0.06

Bonnet Vent Connection: 1⁄16" NPT female

Inlet and Outlet Connections: 1⁄4" NPT
  female (standard). Compression fittings
  available as an option

Approximate Weight: 2 lbs

Purge Gas Equipment for Industrial Lasers

 Materials of Construction
Body: AG3800: Brass Bar Stock
  AG3805: Nickel-Plated Brass Bar Stock
  AG3810: Type 316 SS Bar Stock
Gauges: AG3800: Brass
  AG3805: Chrome-Plated Brass
  AG3810: Type 316 Stn. Stl.
Bonnet: AG3800: Brass
  AG3805: 300 Series Stn. Stl.
  AG3810: 300 Series Stn. Stl.
Other Metal Parts Exposed to Gas:
  AG3800, AG3805: Brass
  AG3810: Type 316 Stn. Stl.
Seats: PCTFE
Diaphragm: Type 316 Stainless Steel
Friction Sleeve: Teflon®

Optional Equipment

Equipment Part No.
Panel Mounting Ring* PM3803
Regulator Mounting Plate and Hardware* RP1
Inboard Helium Leak Test and Test Report HT1000
Outboard Helium Leak Test and Test Report HT1001
Compression Fittings (two required)*  
  1⁄8" compression for Model AG3800, AG3805 SG6703
  1⁄4" compression for Model AG3800, AG3805 SG6704
  1⁄8" compression for Model AG3810 SG6713
  1⁄4" compression for Model AG3810 SG6714
* If selected, these items are not installed on the regulator. They are shipped as separate items.

Table I

Part No.   Delivery Pressure
Brass Nickel-Plated
Brass		 Stainless Steel   Range
(psig)		 Gauge (dual scale)
(psig) (bar)
AG3800-30 AG3805-30 AG3810-30   4–30 0–60 0–4
AG3800-100 AG3805-100 AG3810-100   10–100 0–200 0–14
AG3800-300 AG3805-300 AG3810-300   20–200 0–400 0–27
AG3800-500 AG3805-500 AG3810-500   30–500 0–600 0–41