Advanced Specialty Gas Equipment


Line Regulator Model AG1010 LINE REGULATORS
Models AG1000, AG1010

Ultra High Purity, Ultra High Flow Line Regulators

The Model AG1000 and AG1010 line regulators are ideal for high flow delivery (pipeline) systems requiring high leak integrity and guaranteed gas purity levels. The large main valve and flow capacity of Cv=1.0, allow for flow rates up to 100 scfm at a maximum inlet pressure of 3000 psig,

Model AG1000 is suitable for non-corrosive service, while Model AG1010 is designed for corrosive gas applications.

 

 


Standard Features
  • Metal to Metal Diaphragm to Body Seal (without back-up o-ring) assures maximum diffusion resistance.
  • High Purity Regulator Design permits vacuum purging of regulator.
  • In-line Porting permits direct installation of regulator in piping system.
  • Balanced Poppet (stem) minimizes effect of changes in inlet pressure on delivery pressure settings.
  • Filter traps foreign matter, extends regulator life and reduces maintenance.
  • Threaded Holes in Rear of Regulator permit front panel mounting.
  • 21⁄2" Gauge reads easily for more precise settings.
Optional Features
  • Mounting Ring permits regulator to be panel mounted
  • Regulator Mounting Plate allows for easy mounting of regulator to wall or panel.
  • Internal (Inboard) Helium Leak Test and Test Report determines inboard leak rate of gas from regulator to atmosphere; test report certifies leak rate of less than 2 x 10–8sccs air equivalent.
  • External (Outboard) Helium Leak Test and Test Report determines outboard leak rate of gas from regulator to atmosphere; test report certifies leak rate of less than 5 x 10–7 sccs air equivalent.
Specifications
Maximum Inlet Pressure: 3000 psig

Delivery Pressure Range

Delivery Pressure Gauge

Filter: 40 micron

Gauge Size: 21⁄2" Dial

Operating Temperature Range: -40°F to 140°F

Flow Coefficient: Cv = 1.0

Inlet and Outlet Connections:
  1⁄2" NPT female (standard)

Approximate Weight: 4 lbs

 

Materials of Construction
Body: AG1000: Brass Bar Stock
  AG1010: Type 316 SS Bar Stock
Gauges: AG1000: Brass
 AG1010: Type 316 Stn. Stl.
Bonnet: Electroless Nickel-Plated Brass
Other Metal Parts Exposed to Gas: AG1000: Brass
  AG1010: Type 316 Stn. Stl.
Seat: PCTFE
Diaphragm: Type 316 Stainless Steel
Seals: PTFE

Optional Equipment

Equipment Part No.
Panel Mounting Ring* PM3803
Regulator Mounting Plate and Hardware* RP2
Inboard Helium Leak Test and Test Report HT1000
Outboard Helium Leak Test and Test Report HT1001
Compression Fittings (two required)*  
 1⁄2" compression for Model AG1000 SG6708
 1⁄2" compression for Model AG1010 SG6718
* If selected, these items are not installed on the regulator. They are shipped as separate items.

Table I

Part Number     Delivery Pressure
Brass Stainless Steel   Range
(psig)
Gauge (dual scale)
(psig) (bar)
AG1000-30 AG1010-30   4–30 0–60 0–4
AG1000-100 AG1010-100   10–100 0–200 0–14
AG1000-200 AG1010-200   20–200 0–400 0–27