|
Home > Cylinder Safety
Equipment
 |
SSR Series
Recommended for use where cylinders may be exposed to vehicular traffic
or material handling equipment collisions. Racks are available in
standard and custom configurations from one to 16 cylinder capacity.
Racks meet or exceed requirements for UFC, NFPA, CGA, and OSHA, as well
as Seismic Zone 4 requirements.
» View
complete specs or request a quote
|
 |
PR Series
Designed to provide a safe and cost effective means to mount gas
cylinders and delivery systems where wall space is inaccessible. They
are available in various cylinder configurations and can be supplied
with or without process panels. The process panels can be used to mount
changeovers, regulators, valves, and other components of a gas delivery
system.
» View
complete specs or request a quote
|
 |
Safely secure and support gas cylinders at all times to prevent tipping
with properly designed bench, wall or non-tip floor stands.
» View
complete specs or request a quote
|
 |
GC Series
Cabinets provide a safe and cost effective means to isolate hazardous
gas cylinders from the surrounding workplace. The cabinet exhaust vent
is designed to be coupled with a fan (not supplied) to provide a "local"
exhaust gas control system to maximize operator safety when working with
hazardous gases. These cabinets also protect cylinders and delivery
systems from accidental contact, unauthorized handling and tampering.
» View
complete specs or request a quote
|
 |
FRB Series
Fire Resistant Barriers meet and exceed NFPA, UFC, OSHA and CGA
requirements for cylinder fire separation partitions. Designed for use
in combination with SSR Series Stationary Cylinder Storage Racks (sold
separately), these fire resistant barriers also mount to exterior walls
and a floor using predrilled mounting holes .
» View
complete specs or request a quote
Top |
 |
RM Series
Improve laboratory safety, ensure gas purity and help organize working
areas wherever compressed gas cylinders are used by installing regulator
safety mounting brackets. Wall mounted and bench- mounted configurations
increase worker efficiency, while making it easier to change-out gas
cylinders. They can be used with any style cylinder regulator
incorporating an inlet CGA connection. Available in single or dual scale
configurations and options like audible and visual alarms (RMA Series)
to alert user of product depletion make regulator safety mounting
brackets versatile to meet most application requirements.
» View complete
specs
» Download
complete specs (pdf)
» Request a quote
|
 |
Prevent a flash or flame from reaching the cylinder with fuel gas and
oxygen flash arrestors. These compact arrestors provide both a flame
barrier to extinguish flashback and a thermal-cut valve to positively
shut-off gas flow in the event of downstream fire reaching the arrestor.
Arrestors are UL listed and meet or exceed safety requirements for ANSI,
OSHA and NFPA.
» View
complete specs
» Download
complete specs (pdf)
» Request a
quote
|
 |
SG6220 Series
Locking caps ensure safety and reduce the possibility of misuse and
vandalism with gas cylinders by limiting unauthorized access to the main
cylinder control valve and regulator. They are designed to fit most
North American high and low pressure cylinders and meet standards of DOT
and CGA by attaching securely to the collar of the cylinder.
» View
complete specs or request a quote
|
 |
FS Series
These valves are commonly used as a safety device to protect a system
from excess flow in the event of equipment failure or to protect
personnel and property in the event of a ruptured line. They are
designed to automatically shut-off the delivery of gas in a line if the
flow exceeds a preset limit.
» View
complete specs
» Download
complete specs (pdf)
» Request a quote
|
 |
Protect regulators and equipment from damage caused by
over-pressurization. These spring loaded relief valves are designed to
relieve excess pressure and to close and reseal once reseating pressure
has been achieved.
» View
complete specs
» Download
complete specs (pdf)
» Request a
quote
|
 |
SG3890 Series
To enhance safety and reduce the possibility of operator exposure,
purging should be done before changing out cylinders to remove residual
corrosive or toxic gases. Purge assemblies provide a means to introduce
an inert purge gas into a gas delivery system after a service gas has
been connected. Before initial and subsequent system start-ups, purging
should also be performed to remove atmospheric contaminates that will
react with a corrosive gas forming highly corrosive acids. These acids
will attack most metals, including stainless steel, thereby reducing the
service life of regulators and other system components.
» View
complete specs
» Download
complete specs (pdf)
» Request a quote
Top |
|
